Siemens SIMODRIVE 611 digital Configuration Manual page 424

C Certificates/Declarations of Conformity
Appendix A of the EC Declaration of Conformity No. E002
A8: Typical system configuration
SIMATIC FM 357 (SINUMERIK FM NC)/SIMODRIVE 611 with analog
setpoint interface
Metal cabinet
SIMATIC
PS CPU
FM
307 314
357
SIMODRIVE
Fil- -
611
ter
2)
1)
Reactor
Line terminal
1) for I/R module and UI module 28 kW
2) Filter in the module group or separate
3) or FM NC
4) When using FM 357--2 and the new components, then it is also
permissible to arrange/locate the SIMATIC components outside the cabinet
(cable length between the cabinet and SIMATIC components
All components that are permitted according to the ordering documentation for the
S
system group comprising SIMATIC FM 357, SINUMERIK FM NC and SIMODRIVE
611A, fulfill, in the group, Directive 89/336/EEC
Standard conformance, see Appendix C
S
Note:
In the schematic of the system configuration, only the basic measures to be in
compliance with Directive 89/336/EEC of a typical system configuration are shown.
In addition, especially when deviating from this system configuration, the instructions for
a correct EMC system configuration and of the product documentation and
EMC Design Guidelines for SINUMERIK; SIROTEC, SIMODRIVE (Order No. 6FC 5297--
0AD30--0BPX) should be carefully observed.
Siemens AG 2002. All rights reserved
konf/erkl/002/anh_a
C-424
www.aotewell.com
to the
300
S7- -
Operator panel
4)
SM
to SIM. 611
374
3)
Handheld
panel
Mach. control
panel
handwheel
el.
A- -8/23
SIMODRIVE 611 Configuration Manual (PJU) - - 05/2008 Edition
sales@aotewell.com
Alternative arrangement:
SIMATIC 300
S7- -
CPU
PS SM
FM
314
307
2 374
357- -
l < 3 m
l < 3 m
LG (Motor)
Machine base
TG
M
< 3 m).
© Siemens AG 2008 All Rights Reserved
Industry Automation
05.08 02.03
05.01
4)
LG
Version 07/08/15
+86-755-8660-6182