Siemens SIMODRIVE 611 digital Configuration Manual page 145

Aotewell Ltd
05.01
Analog setpoints
and actual values
Fuse
© Siemens AG 2008 All Rights Reserved
SIMODRIVE 611 Configuration Manual (PJU) - - 05/2008 Edition
HongKong|UK|China
www.aotewell.com
S X121: Axis 1
S X122: Axis 2
Table 5-25 Connectors X121, X122; both are 15pin sub- -D socket connectors
Pin X121 X122
1 P24RV1 P24RV2
2 P24RV1 P24RV2
3 P24RV1 P24RV2
4 P24RV1 P24RV2
5 M M
6 USOLL1N USOLL2N
7 USOLL1P USOLL2P
8 M M
9 M24EXT M24EXT
10 M24EXT M24EXT
11 M24EXT M24EXT
12 - - - -
13 M M
14 UIST1N UIST2N
15 UIST1P UIST2P
1) I = Input, O = Output
The analog actual value inputs are differential inputs with an input resistance of
100 kΩ each.
The load capability of the 24 V outputs (P24RV1/2) is
S for an ambient temperature of 40 °C
for an ambient temperature of 55 °C
S
for the mean current value with a load cycle of 10 s duration.
The temperature corner points may be interpolated linearly.
The short--term current rating of the 24 V outputs is 3.0 A (200 ms).
In the event of an overload, the F1900 or F1901 fuse on the ANA control unit
will blow.
The switched 24 V outputs for axes 1 and 2 are protected by F1900 (axis 1) or
F1901 (axis 2) miniature fuses.
Value: 2.5 AF/250 V; 5x20 mm UL
From: Wickmann--Werke GmbH
Annenstrasse 113
58453 Witten, Germany
or
Postfach 2520
58415 Witten
Order No.: 19194
sales@aotewell.com
5.5 "ANA module" control board
Type Function
1)
O P24EXT switched, from X431.5
O P24EXT switched, from X431.5
O P24EXT switched, from X431.5
O P24EXT switched, from X431.5
Electronic ground
O Analog setpoint output, reference ground
O Analog setpoint output +/- - 10 V
Electronic ground
O M24EXT, from X431.6
O M24EXT, from X431.6
O M24EXT, from X431.6
Not assigned
Electronic ground
I Analog actual value input, reference ground
I Analog valve actual- - value input, +/- - 10 V
2.0 A
1.5 A
Industry Automation
5 Control Units
5-145
+86-755-8660-6182
5