For Users Receiving Digital Broadcast; Services - Pioneer DVR-940HX-S Operating Instructions Manual

Getting started
13 Press to continue after reading
ENTER
the HDD caution.
k Setting In the event of HDD failure, recordings may
be lost or normal playback/recording may
Line System
not be possible.
er Save
As recordings might be lost in case of a HDD
P
failure, we recommend to use the HDD only
as temporary storage media.
p Navigator
p Navigator
Please copy recordings you want to keep
to recordable DVD.
Press ENTER to continue.
ENTER
14 Select 'Finish Setup' to exit
the Setup Navigator, or 'Go Back' if you
want to start again.
k Setting
Line System S etu p i s co m p l ete!
er Save E n j o y u si n g yo u r DVD reco rd er!
Fi ni sh Set u p Fi n i sh Setu p
p Navigator p Navigator Go B ack
That completes basic setup using the Setup
Navigator.
• If there are blank channels with no
station, you can set these to skip using
the manual channel setting. See Manual
CH Setting on page 140.
• DVR-940HX-S: A connected external HDD
cannot be initialized from the Setup
Navigator—please refer to Initialize HDD
on page 132.
For users receiving digital
broadcast services
This unit can set its internal clock
automatically from digital broadcasts.
However, depending on the broadcaster, the
clock information received may not be
accurate.
Use the following procedure (while the
recorder is not recording) to set the clock
manually.
1 Press HOME MENU.
HOME MENU
ENTER
2 Select 'Initial Setup' > 'Basic' >
'Clock Setting'.
3 Highlight the time setting.
4 Press ENTER to display the
ENTER
manual clock setting screen.
5 Set the correct time.
Return to automatic clock setting
• To return to the automatic clock setting,
follow the instructions for 'Replace
Channels' (page 138).
04
39
En