Additional Information; Resetting The Recorder; Setting Up The Remote To Control Your Tv; Using The Tv Remote Control Buttons - Pioneer DVR-520H Operating Instructions Manual

Additional information

Chapter 14
Additional information

Resetting the recorder

If you need to, you can reset the recorder to all its factory
settings.
1 Make sure that the recorder is on.
2 Press and hold STOP and press
ON.
The recorder turns off with all settings reset.
Setting up the remote to control your
TV
You can use the supplied remote to control your TV. To be
able to use this feature you first have to program the
remote with a maker code from the table below.
1 Press and hold down the CLEAR button, then
enter the maker code for your TV.
The LED indicator on the remote controls lights.
See the table below for the list of maker codes. If there is
more than one code given for your make, input the first
one in the list.
• If the maker's name of your TV doesn't appear in the
table below, you will not be able to use this remote to
control your TV.
2 Press TV to check that the remote works with
your TV.
If the remote is set up correctly, the TV should switch on/
off. If it doesn't and there is another code given for your
maker, repeat step 1 with a new code.

Using the TV remote control buttons

The table below shows how to use this remote control
with your TV.
Button What it does
TV
Press to switch the TV on/off (standby)
INPUT SELECT Press to change the TV's video input
TV VOLUME
Use to adjust the TV volume
TV CHANNEL Use to change TV channels
Maker
Alba
Bush
Finlux
Fisher
STANDBY/
Fujitsu
Funai
Goldstar
Grandiente
Grundig
Hitachi
ITT
Mitsubishi
Nokia
Panasonic
Philips
Pioneer
RCA
Salora
Samsung
Sanyo
Sei
Sharp
Sony
Tandy
Telefunken
Thomson
Toshiba
Victor
Code
66
76
84
61, 65
77
67
79
87
51, 82
56, 60, 83, 86
70
59
53, 81
58, 72
57, 85
50, 80
68
71
73, 75
74
78
52
54
69
64
62
55
63
14
109
En