Install The Control Panel; Mount The Control Panel - Bosch B6512 Installation Manual

Control Panels
4 ᅳ Tamper switch mounting location
5 ᅳ Control panel mounting location
5.2

Install the control panel

This section includes instructions to mount the control panel in the enclosure, connect earth
ground, and make other control panel connections.
5.2.1

Mount the control panel

1.
Figure 5.2: B10 and B11 control panel placement locations
Callout ᅳ Description
1 ᅳ B10 Medium Control Panel Enclosure
2 ᅳ B11 Small Control Panel Enclosure
3 ᅳ Mounting clip locations for the control panel
2.
Figure 5.3: Standoff attachment
Bosch Security Systems, Inc.
Identify the control panel mounting location in the enclosure.
3
Snap the four supplied plastic standoffs onto four enclosure support posts. If using the
B12 Mounting Plate for D8103 Enclosure, attach the standoffs to the plate support posts.
Do not attach the standoffs with screws at this time.
Installation Manual
Control panel installation | en
2
3
2017.04 | 15 | F.01U.287.180
19