Keypad Installer Menu - Bosch B6512 Installation Manual

94 en | Keypad Installer menu
20

Keypad Installer menu

In addition to using RPS to configure and diagnose a system, you can also perform
programming and diagnostics using a keypad. Programming and diagnostics options appear on
the keypad when you access the Main Menu (Installer) option, which includes the Installer
menu. The Main Menu (Installer) option becomes available during normal control panel
operation only when you enter your installer passcode and press Enter. The default installer
passcode is 1-2-3.
The tools within the Main Menu (Installer) are:
–
–
–
–
–
–
Installer keypads and SERVICE MODE
The Installer menu is also available from the Service menu when in SERVICE MODE. The
Service menu is a subset of the Main menu (Installer) option. You can use Service mode at any
keypad, but the feature is most useful when you want to directly connect an Installer keypad
to the control panel for keypad programming at the control panel.
Entering SERVICE MODE:
1.
2.
3.
2017.04 | 15 | F.01U.287.180
Programming Menu. Program several parameters to make your system operational,
including phone number and format, enhanced communication options, RPS parameters,
users, points, and keypad parameters. Refer to [1] Program menu (Programming), page
100 for more detailed information on each programming option, and to RPS Help or the
control panel's Program Entry Guide.
Wireless Menu. Add, replace, remove, and diagnose points and repeaters. Refer to [2]
Wireless menu, page 119.
Diagnostics Menu. Diagnose points, repeaters, cellular service, IP cameras, and Cloud.
Refer to [3] Diags menu, page 121.
Service Bypass Menu. View whether points are removed from service. Refer to [4] Service
Bypass (Serv Byp) menu, page 123.
Version Menu. View the version information for the control panel, encryption, and more.
Refer to [5] Versions menu, page 123.
Cloud Menu. Enable Cloud connectivity for the control panel. Refer to [6] Cloud menu,
page 124.
Set the Installer keypad to address 0.
Connect it to the control panel.
Use the control panel RESET button to enter SERVICE MODE. The rate of flashing of the
Heartbeat LED increases while in SERVICE MODE.
Installation Manual
Control Panels
Bosch Security Systems, Inc.