Specifications - Bosch B6512 Installation Manual

Hide thumbs Also See for B6512:
Table of Contents

Advertisement

Control Panels
21

Specifications

Control panel power supply specifications
Voltage input (power
supply)
Current
requirements
Power outputs
Minimum operating
voltage
SDI2 bus
Ethernet connection
(optional)
Battery discharge/
recharge schedule
Environmental
Arming stations
Bosch Security Systems, Inc.
Primary
18 VAC
terminals
Secondary BAT terminals
Control Panel: Idle 125 mA; Alarm 155 mA
Refer to the Standby battery requirements and calculations section in the control
panel Installation and System Reference Guide for the current draw requirements of
other system components.
All external connections are power-limited. The battery terminals are not power
limited.
SDI2 terminals and
PWR/R and
interconnect
COM/B
connector
terminals
Alarm power
OUTPUT A
output
terminal
Aux power
AUX and
COM
terminals
Fire and Fire/
Alarm power output for OUTPUT A cannot exceed 500 mA.
Burglary Systems
10.2 VDC (The control panel might operate below this voltage, but it will cease to
operate as an alarm panel.)
12 VDC nominal (7500 ft combined length) maximum
10BASE-T
100BASE-TX
Discharge cycle
13.65 VDC - Charging float level.
12.1 VDC - Low Battery Report, if programmed.
10.2 VDC - Minimum operational voltage.
Recharge Cycle
AC ON - Battery charging begins and AC Restoral Reports sent.
13.4 V - Battery Restoral Report sent. Battery float charged.
Temperature
0℃ to +49℃ (+32℉ to 122℉)
Relative Humidity
5% to 93% at +32℃ (+90℉) non-condensing
B942/B942W, B930, B921C, B920, B915/B915I, Keyswitch
18 VAC 22 VA Class 2 transformer (CX4010)
12 Volt Sealed Lead Acid Rechargeable Battery (D126
or D1218)
800 mA for continuously powered devices.
Shared with AUX power terminal.
1.3 A for Burglary applications. Output can be
steady or one of four pulsed patterns depending
on programming. Refer to Outputs in RPS Help
or the control panel Program Entry Guide.
800 mA for continuously powered devices.
Shared with SDI2 R/PWR terminal and
interconnect connector.
Installation Manual
Specifications | en 125
2017.04 | 15 | F.01U.287.180

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

B5512B4512B3512B5512eB4512eB3512e

Table of Contents