Reporting > [3] Routing Menu Parameters - Bosch B6512 Installation Manual

102 en | Keypad Installer menu
9.
10. Depending on keypad model:
11. Delete existing characters, if necessary, and then enter the new poll rate.
12. Press Save or Enter. The keypad shows Parameter saved.
13. Depending on keypad model:
14. Press the icon or softkey for the desired option or use
15. Press Save or Enter. The keypad shows Parameter saved.
16. Depending on keypad model:
17. Press the softkey for the desired option or use
18. Press Save or Enter. The keypad shows Parameter saved.
19. Escape from the menu.
20.1.3 [1] Reporting > [3] Routing menu parameters
Use routing to program primary and backup destinations over standard telephone lines, local
area network (LAN) or wide area network (WAN). In this menu, you can designate the primary
and backup destinations for up to four routes.
Options include:
No Device, Phone 1, Phone 2, Phone 3, Phone 4, SDI2-1 D1, SDI2-1 D2, SDI2-1 D3, SDI2-1 D4,
SDI2-2 D1, SDI2-2 D2, SDI2-2 D3, SDI2-2 D4, Onboard D1, Onboard D2, Onboard D3, Onboard
D4, Cellular D1, Cellular D2, Cellular D3, Cellular D4.
Primary Device
Backup Device
Primary (Destination)
1.
2.
3.
4.
5.
6.
7.
2017.04 | 15 | F.01U.287.180
Press Save or Enter. The keypad shows Parameter saved.
Press Poll Rate and Enter.
-or-
Press Next and Enter and then Enter.
Press Format and Edit.
-or-
Press Next and Enter and then Enter.
the desired format, Modem4 or Contact ID.
Press AES Size and Edit.
-or-
Press Next and Enter and then Enter.
desired size.
No Device
No Device
Enter the installer passcode, and then open the [1] Installer Menu.
Go to [1] Programming Menu > [1] Reporting > [3] Routing.
Use /Previous or /Next to scroll through the list of routes and go to the route you
want to program.
Press Edit or Enter to edit the route.
Use /Previous or /Next to scroll through the list of devices (for destination 1) and
go to the destination 1 option you want to select for the current device (for example,
Phone 1). To keep destination 1, escape from the menu. To change to a different
destination (2, 3, or 4), press [Edit Destination], and continue to the next step.
Press Save or Enter. The keypad shows Parameter saved.
Escape from the menu.
Route 1 Route 2
___________ ___________
___________ ___________
Installation Manual
/Previous or
/Previous or /Next to select the
Route 3
___________
___________
Bosch Security Systems, Inc.
Control Panels
/Next to select
Route 4
___________
___________