Play Lists & Classifying Songs
Editing a Playlist
This sets how each track in the play list will be played.
The following items can be changed.
• Track Hot CUE (1
• Mix Out: Sets how the song being played is to end.
• Mix In: Sets how the next song is to start playing.
To make the settings, click the [Toggle Display] at the top, right of
the play list, widening it, and display the item(s) to be edited.
'4-2-2 Changing the Order of Songs During Auto-Play' P.62
for more information about changing song order and adding/
Following is a detailed explanation of how to make the settings for
Track Hot Cue
Specify a track hot cue as an auto setup cue.
Right click the icon of a cue mark and then click [Auto Setup
• To cancel Auto Setup Cue settings, click [Auto Setup CUE OFF].
Specify the point where the song will start playing.
You can also specify the same position as the track hot cue by
DJS Ver. 1.600
4): Settings for track hot cues and loops
(Contd. on the next page)
Editing a Playlist
Switching the Width of a List
Click the [Toggle Display] button on the
upper right of the play list display.
When the [DJ Play] screen is opened,
it is displayed at the narrowest list
In addition, if you click the player or the
mixer, the play list is displayed at its
Items that cannot be Edited
No items other than [Track Hot CUE]
[Mix In] [Mix Out] can be edited
The following symbols are used.
Highrighted: Auto Setup CUE ON
Registeing Track Hot Cue
into List Hot Cues
Drag a [Cue Mark] and drop it in the
hot cue list.
Clearing Track Hot Cue
Right click the icon of a cue or loop and
then click [Clear Track Hot CUE].
When the Track Hot Cue is
set to Auto Setup Cue
It automatically sets that cue point to
[Mix In]. This value cannot be
When no Value has been set
for [Mix In]
The starting point of the song acts as the
beginning of the song. (In line with auto