3
Playing Sound
3-6
Using the Fader Start Functions
If you use the Fader Start function, you can start a song playing
through either the operation of the cross fader or a channel fader. In
addition, if you set up a cue, you can also back cue.
You can do various things like starting players, cueing back, etc
simply via the fader, so you can make it perform like a sampler.
3-6-1
Channel Fader Start
How to use the Channel Fader Start function is explained here for
Player A. Before conducting the operations below, set a song for
Player A and put it into Cue Standby mode. Set the Channel Fader to
its minimum setting (Volume 0).
1
Click Player A's [Fader Start] button to display
[FS-CH].
• Every time you click the [Fader Start] button, it switches
between the modes as follows.
[FS-OFF] [FS-CH] [FS-CR] [FS-OFF]
54
DJS Ver. 1.600
(Contd. on the next page)
Using the Fader Start Functions
Back Cue
Moves the playback position to the cue
point and goes to standby at that point.
Setting a [CUE]
'Using the [CUE] button' P.28
Index
Contents
Need help?
Do you have a question about the SVJ-DL01D Pro DJ and is the answer not in the manual?