Setting up to 8 Points to Start
Playing (List Hot Cue)
List hot cue starts playback at the same time as when a cue point is
called out. Further, you can set up to 8 cues for the whole track list.
(You can set up to 8 cues for the whole play list.)
Even if you do not set any list hot cues for songs on a player, if you
just click list hot cue, it calls out a cue point. It is better to set points
that are used more frequently than track hot cues.
Determining List Hot Cue Points
List hot cue points can record cues or loops with the [List Hot CUE]
buttons on the lower part of the play list, from [A] to [H].
Specify a song on player A or B and determine
the point to record.
• When you record a loop, start the loop playing.
Clicking the [Record] button makes the [List Hot
CUE] buttons (A to H) light up red.
• This state is the List Hot Cue record mode.
Setting up to 8 Points to Start Playing (List Hot Cue)
(Contd. on the next page)
Track Hot Cue
'4-1 Setting up to 4 Points to Start
Playing (Track Hot Cue)' P.57
Click the [Record] button again.
DJS Ver. 1.600