Put a song on player A or B and determine the
point(s) to record.
Click the [Record Track Hot CUE] button and it
makes the [Track Hot CUE] button light up red.
• The background of [Track Hot CUE] buttons that are
already being used light up.
Setting a Cue Point:
During playback or during a silent pause, click the
[Track Hot CUE] button at the point you wish to set a
Setting up a loop:
While the loop is playing, click the [Track Hot CUE]
• The number of the [Track Hot CUE] button you click will
flash red for about 3 seconds.
Click the [Record Track Hot CUE] button.
• The Track Hot Cue settings are complete and it returns to
the Call Out mode.
DJS Ver. 1.600
Setting up to 4 Points to Start Playing (Track Hot Cue)
(Contd. on the next page)
Overwriting a Track Hot Cue
that is being Used
Click a [Track Hot CUE] button that is
already being used and conduct the
Cancel the Setting
Click the [Record Track Hot CUE]
Playing a Loop
'3-3-1 Setting up Loops (Play)' P.44
Track Hot Cue Display
'Waveform Display Symbols (Track
Hot Cue Tags)' P.59