Click the headphone cue for player B.
• The headphone cue will light up.
About the Headphone Cue
When you click a headphone cue, you can output the sound
from that headphone.
Functions that have a headphone cue:
Player A, Player B, List Player, Master, Effector
Listen to the song over your headphones and
search for the playback start position.
Clicking the [A/F] button of player B at the
playback start position pauses it.
(Contd. on the next page)
Using the Auto Function to Mix Songs
Sound Output to Headphones
Get a sound card that is for
headphones. If there is no sound card,
the headphones will not work.
'1-1 When Using the DJS Mixer
Adjusting your headphones
You can make adjustments for the
volume of your headphones, mixing
levels, and switching between stereo
and mono split.
'[Headphone Monitor Control]' P.27
Rewind & Fast Forward
If you click the search buttons, 
 you can move the playback
position to the vicinity where you want it.
Changing the Playback
You can move the playback position to
the point you click in the waveform
display or the [Playing Address].
Fine Tuning the Pause
If you turn the [Jog Dial] while the song
is paused, you can make fine
adjustments in frame units to the paused
position. (1 Frame 1/75 Sec.)
In addition, you can also click the
search buttons   to make fine
DJS Ver. 1.600