Table of Contents
Advertisement
4
Useful Functions
4-6
Operations used with DMP-555
If you connect the Pioneer digital media player DMP-555 with a USB
cable, you can operate DJS with the DMP-555's operation keys.
Functions you can Perform from the DMP-555
DJ Play Function
Create Function (Starts & Stops Playback, Sets Loops, etc.)
Transfer Function (SD Memory Card Reader and Writer)
4-6-1
Connecting
You can connect the DMP-555 to your computer with a USB cable.
You will need to install the driver software in order to use the DMP-
555.
1
Connect the USB cable to the USB ports of the
computer and of the DMP-555.
• You can also start up the computer, turn the DMP ON and
then connect them.
Computer
Connecting a 2nd DMP-555
If you connect a second DMP-555 via USB cables, you can
operate Players A & B from their respective DMP-555s.
'4-6-2 Allocating the DMP-555 to a Player' P.69
68
DJS Ver. 1.600
Supplied USB cable
DMP-555
The DMP-555 is not sold in some
countries and/or regions, such as in
Japan.
When using the Transfer function
you can use a reader/writer compliant
with SD memory cards' Copyright
Protection Function in place of the
DMP-555.
'Chapter 8 Using SD Cards' P.91
SD Card Reader/Writer
Please use devices that are compatible
with copyright protection functions.
(Check the specs of your SD card
reader/writer before connecting it.)
Driver Software Installation
It is necessary to install the driver
software before connecting a DMP-
555 to your computer. For information
on installing the driver software, refer
to the users manual for the DMP-555
DMP-555
and/or the [DMP-555] folder on the
DJS CD-ROM. Please note that the
DMP-555 cannot be used with
Windows Vista.
After Drivers are Installed
You do not need to install drivers again
even if you make changes, such as to
your USB port connections, connecting
a 2nd DMP-555, etc.
Operations used with DMP-555
Warning!
Warning!
Index
Contents
Advertisement
Table of Contents
