Zoom In/Out Button
Mixer, Effector, Equalizer (Shared by Players A & B)
Level +/- Buttons
Trim +/- Buttons
Headphone Cue Button
Auto Fader Button
Volume +/- Button
Fader Start Button
Mix Mode Button
Fader Curve Button
Beat Adjust Button
DJS Ver. 1.600
Expands or shrinks the waveform display by one increment.
[ZOOM]: Displays Part of the Waveform / [FULL]: Displays the Entire Waveform
Turns the monitor of the selected source ON/OFF (Mutes) via the headphone cue.
If you right click, it displays the [HEADPHONES] screen.
In addition, if you click it while monitoring the list player with your headphones, you
can switch to monitoring the selected source with headphone cues.
Adjusts the volume for the headphones. If you right click, it becomes positioned in the
middle of its range.
Increases & decreases headphone volume.
Toggles the Auto Trim function ON or OFF. (Automatically adjusts the Trim to the
average level of the opposite channel.)
Adjusts the volume input from the player to the master. If you right click, it becomes
positioned in the middle of its range.
Increases & decreases the volume input from the player to the master.
Toggles the equalizer function ON or OFF. If you right click, it displays the [EQ
Select the source to monitor on your headphones.
Starts the Auto Fader (moves the channel fader up/down.) Clicking it while the Auto
Fader is operating stops the Auto Fader. If you right click, the menu screen for
specifying the beat opens.
Adjusts the volume of the player (A/B). If you right click, it becomes positioned in the
middle of its range.
Increases & decreases player (A/B) volume.
Switches the Fader Start settings.
(FS-OFF FS-CH FS-CR FS-OFF)
Switches the Mix Mode. (4 Curves)
If you right click, the menu screen for specifying the beat opens.
Switches the Fader Curve. (3 Curves)
Displays the automatically detected beat through four round blinking indicators. The
indicator on the furthest left-hand side lights up with the starting beat. Green is Player
A and blue is Player B.
The beat indicator on the furthest left-hand side functions as a [Beat Adjust] button.
The timing with which you click it is re-displayed in the [Beat Indicator] as the
Displays the menu for switching effects. If you right click, it displays the [EFFECT]
Adjusts the volume of effects. If you right click, it becomes positioned in the middle
of its range.
Table of Functions
(Contd. on the next page)