Changing The Password; Performing An Aqa Reset - wtw PhotoLab S6 Operating Instructions Manual

8. Analytical Quality Assurance (AQA)

8.1.5 Changing the password

When delivered, the default password is 0000. This
password can be changed as follows:

8.1.6 Performing an AQA reset

If the Analytical Quality Assurance is to be switched off
completely or reset to the delivery state, this can be
made via the reset function in the AQA configuration
submenu.
26
– Call up the change password submenu.
1
– Confirm with .
– Input the required password, e.g. 0100, with
1
– Confirm with .
– Input the password once again:
1
– Confirm with .
– Call up the reset submenu
1
– Confirm with .
– Select the reset menu item
1
– Confirm with .
An AQA reset is performed.
3