Table of Contents
Advertisement
8. Analytical Quality Assurance (AQA)
A password request appears:
If the input was incorrect:
After the password has been successfully input, the
AQA configuration submenu appears:
22
A separate password protects settings of the AQA-
configuration against unauthorized access (Changing
the password see section 8.1.5).
– Input the password with
Only numeric characters are allowed.
Default: 0000
1
– Confirm with
.
– Repeat the input.
If you have forgotten the password, contact the
service department.
– Call up the AQA mode function.
Default: off (no monitoring)
– Select AQA mode:
– off
– n weeks
– n measurements
1
– Confirm with
.
– In the setup menu, call up the AQA check submenu.
Selection of the AQA mode:
l
meter
l
system
The menu item, meter, only appears after the
corresponding PhotoCheck standards have
been input (see section 8.2.1).
3
:
Advertisement
Chapters
Table of Contents
