Table 3-6. Input/Output Ratings And External Wiring Recommendations For The Eaton 93Pm-L 120 - (Single Input Bypass 220/208) - Eaton 93PM-L Installation And Operation Manual

UPS Installation Plan and Unpacking

Table 3-6. Input/Output Ratings and External Wiring Recommendations for the Eaton 93PM-L 120 - (Single Input Bypass 220/208)

Basic Unit Rating
Input and Output Voltage
AC Input to UPS Bypass (Four Wire, Single-Feed)
Full Load Current: (3) Phases– see Note, (1) Ground
Neutral Current
Minimum Conductor Size (Phase A, B, and C)
Number per Phase
Neutral Wire Size
Number
Minimum Conductor Size (Ground)
Number
DC Input from External Battery (Line-Up-and-Match Eaton 93PM-L IBC-SW, IBC-LW or IBC-LHW)
For Line-Up-and-Match wiring refer to Eaton 93PM Integrated Battery Cabinet Installation Manual-Small Welded or Eaton 93PM Universal Integrated Battery
Cabinet Installation Manual-Large and Large High Rate
DC Input from External Battery (Standalone Eaton
93PM-L IBC)
(1) Positive, (1) Negative, (1) Ground
Minimum Conductor Size (Phase Positive and Negative)
Number per Pole
Minimum Conductor Size (Ground)
Number
AC Output to Critical Load (Four Wire)
Full Load Current
(3) Phases – see Note, (1) Ground
Neutral Current
Minimum Conductor Size (Phase A, B, and C, and Neutral)
Number per Phase
Neutral Wire Size
Number
Minimum Conductor Size (Ground)
Number
B, C
NOTE Callout letters and
NOTE Line-up-and-match battery wiring with a 105°C
NOTE The SAIC-B is sized for the maximum frame rating of 120 kW. For installations other than 120 kW, the SIAC-B breakers are considered as
switches and overcurrent protection must be provided by the upstream AC source breaker(s). For future upgradability, we recommend that
the system be wired to support the full UPS rating of 120 kW.
3-18 Eaton 93PM-L UPS (20–120 kW, 208V) Installation and Operation Manual P-164000688—Rev 02
B
AWG or kcmil
AWG or kcmil
–
AWG or kcmil
C
AWG or kcmil
– AWG or kcmil
D
AWG or kcmil
AWG or kcmil
–
AWG or kcmil
D
map to Figure 5-6 or Figure 5-7.
rating
is factory supplied with the Eaton 93PM-L Integrated Battery Cabinet (IBC).
Units
kW 20 40
Volts 220/208 220/208
Amps 67 134
Amps 96 192
1 250 MCM
(each) (1) (1)
2/0 500 MCM
(each) (1) (1)
6
(each) (1) (1)
Total Amps 45 90
6
(each) (1) (1)
8
(each) (1) (1)
Amps 56 111
Amps 96 192
3 3/0
(each) (1) (1)
2/0 500 MCM
(each) (1) (1)
8
(each) (1) (1)
Rating 50/60 Hz
60 80
220/208 220/208
202 269
288 385
500 MCM 250 MCM
(1) (2)
300 MCM 500 MCM
(2) (2)
2 1/0 2
(1) (2)
136 181
2 2/0 4/0
(1) (1)
8 4 2
(1) (1)
167 222
288 385
350 MCM 3/0
(1) (2)
300 MCM 500 MCM
(2) (2)
4 2 4
(1) (2)
www.eaton.com/powerquality
100 120
(See Note)
220/208 220/208
336 403
481 577
350 MCM 500 MCM
(2) (2)
4/0 300 MCM
(4) (4)
2 1/0
(2) (2)
226 271
300 MCM 350 MCM
(1) (1)
2 2
(1) (1)
278 333
481 577
250 MCM 350 MCM
(2) (2)
4/0 300 MCM
(4) (4)
2 2
(2) (2)