Mitsubishi Electric NZ2MFB2-16A User Manual page 74

Label to be used
■Module label
Use the following module labels.
Module label
RCPU.stSM.bSts_CyclicTransmission
RCPU.stSD.bnSts_CyclicTransmission_Station[1]
■Label to be defined
Define the global labels as follows.
Setting procedure
1.
Create a project with the contents below.
[Project]  [New...]
2.
Set whether or not to use CC-Link IE Field Network Basic.
[Navigation window]  [Parameter]  [CPU module model name]  [Module Parameter]  [Basic Settings]
3.
Display the network configuration setting window and configure the setting as follows.
[Navigation window]  [Parameter]  [CPU module model name]  [Module Parameter]  [Basic Settings]  [Network
Configuration Settings]
4.
Close the network configuration setting window.
[Network Configuration Settings]  [Close with Reflecting the Setting]
9 PROGRAMMING
72
9.2 Program Example
Description
Cyclic transmission status
Cyclic transmission status of each station (station
number 1)
Device
SM1536
SD1536.0