Table of Contents
Advertisement
3.3
Function List
This section lists the functions of I/O modules.
Item
Input function
Output function
Input response time setting function
Output HOLD/CLEAR setting function
Protection function
SLMP communication function
3.4
List of Functions of Each Module
This section lists the functions of each module.
: Available, : Not available
Model name
Input function
NZ2MFB2-16A
NZ2MFB1-32D
NZ2MFB2-16R
NZ2MFB1-32T
NZ2MFB1-32TE1
NZ2MFB1-32DT
NZ2MFB1-32DTE1
Description
The ON/OFF status (X signal) of inputs is notified to Remote input (RX) of the master
station.
The ON/OFF status (Y signal) of outputs is controlled with Remote output (RY) of the
master station.
This function prevents an incorrect input due to noise by setting the response time
until the module recognizes an actual input as the X signal.
When the I/O module is disconnected from data link, or the CPU module operating
status is STOP, whether to hold or clear the last output value can be set by this
function.
The overload protection function and overheat protection function protect the internal
circuit from overcurrent and its heat.
SLMP can be used to communicate with the I/O module.
Output function
Input response
time setting
function
Output HOLD/
Protection
CLEAR setting
function
function
3 SPECIFICATIONS
Reference
3
Page 65 Input Response
Time Setting Function
Page 66 Output HOLD/
CLEAR Setting Function
Page 67 Protection
Function
Page 68 SLMP
communication function
SLMP
communication
function
39
3.3 Function List
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
