Jumper Settings - AXIOMTEK eBOX622-830-FL Series User Manual

3.2

Jumper Settings

Jumper is a small component consisting of jumper clip and jumper pins. Install jumper clip on
2 jumper pins to close. And remove jumper clip from 2 jumper pins to open. Below illustration
shows how to set up jumper.
Properly configure jumper settings on the eBOX622-830-FL to meet your application purpose.
We are herewith listing a summary table of all jumpers and default settings for onboard
devices, respectively.
Jumper Description
Restore BIOS Optimal Defaults
JP3
Default: Normal Operation
Auto Power On
JP4
Default: Disable
Jumper Setting & Connector
eBOX622-830-FL Series User's Manual
Setting
1-2 Close
Close
35