Device - GE 845 Instruction Manual

CHAPTER 4: SETPOINTS

Device

Custom Configuration
845 TRANSFORMER PROTECTION SYSTEM – INSTRUCTION MANUAL
Figure 4-6: Device Display Hierarchy
Level 1
The custom configuration features allow customization of the 8 Series configurations in
such a way that the User eXperience (UX) of the 8 Series platform is further enhanced.
Configuration Mode
Modern multifunctional Intelligent Electronic Devices (IEDs), such as the 8 Series platform,
support a multitude of functions and features which include: Protection and Control (P&C),
Asset Monitoring, Flexible Logic Engine (FlexLogic), Records and Reporting, Time
Synchronization, Testing/Simulation, etc. Taking into consideration the User eXperience
(UX) of the customer, configuration mode controls how the "Setpoints" are presented by
only displaying settings that are typically used, or settings that are important to configure.
There are two configuration modes supported: Simplified, and Regular.
• In Simplified configuration mode, some of the advanced functions/features or a few
settings under a function are hidden or made read-only (greyed out).
• In Regular configuration mode, all function/features and setpoints of the device are
editable and nothing is hidden or greyed out.
Custom Configuration
Real Time Clock
Security
Communications
Device
Transient Recorder
System
Inputs
Data Logger
Outputs
Fault Report
Protection
Event Data
Monitoring
Flex States
Control
FlexLogic
Testing
Front Panel
Resetting
Installation
Level 2 Level 3
DEVICE
Modbus Protocol
RS485
USB
Wi-Fi
Ethernet
Routing
DNP Protocol
DNP/IEC 104 Points List
IEC 60870-5-104
IEC 60870-5-103
IEC 60870-5-103 Points List
Programmable LEDs
Programmable PBs
Tab PBs
Annunciator
Display Properties
Default Screens
Level 4
4–11