Home Screen Icons - GE 845 Instruction Manual

FRONT CONTROL PANEL INTERFACE
FASTPATH:

Home Screen Icons

NOTE:
3–10
target setting is "Latched", then the corresponding Event Cause LEDs turn ON when the
operate operand associated with the element is asserted and will remain ON until the
RESET button on the front panel is pressed after the operand is reset.
Default labels are shipped in the package of every 845, together with custom templates. A
custom LED template is available for editing and printing, refer to publication GET-20035
from http://www.gegridsolutions.com/multilin. The default labels can be replaced by user-
printed labels. User customization of LED operation is of maximum benefit in installations
where languages other than English are used to communicate with operators.
For LED and Pushbutton programming details, please refer to
The next figure shows the icons available on the front screen. For descriptions of these
screen icons see the following tables.
Figure 3-11: Home Screen Icons
Table 3-1: Security Icon
Security State
User not logged in
User logged in
The security icon only represents the security access level through the front panel.
Table 3-2: Setpoint Group Icon
Description
Identifies the active setpoint group
Table 3-3: Wifi Icon
Wifi State
Disabled
Disconnected
Connecting
Connected
Security Icon Color
Icon is green and locked
Icon is red and unlocked
Wifi Icon Color
Icon is grey and crossed by a red line
Grey
Orange
Green
845 TRANSFORMER PROTECTION SYSTEM – INSTRUCTION MANUAL
CHAPTER 3: INTERFACES
Front Panel.