GE 845 Instruction Manual page 50

MECHANICAL INSTALLATION
DEPTH REDUCING COLLAR
GE PART# 1009-0311 3IN (76.2MM) DEPTH
GE PART# 1009-0310 1.375IN (34.9MM) DEPTH
8 SERIES UNIT
2–6
Figure 2-8: Depth reducing collar installation
8-32x3/8IN P/HD PHIL BLK
GE PART# 1408-0306 (qty:16)
Tightening Torque: 15 in lb (1.7 Nm)
To mount an 8 Series relay with a depth reducing collar, follow these steps:
1. Drill mounting holes as shown on the panel cutout drawing
reducing collar panel
2. Mount the required collar (depth 1.375" or 3") on the captive unit using eight screws as
shown.
3. Mount the combined unit and collar on the panel using eight screws as shown.
cutout).
845 TRANSFORMER PROTECTION SYSTEM – INSTRUCTION MANUAL
CHAPTER 2: INSTALLATION
892703A1.dwg
(Figure 2-7:Depth