GE 845 Instruction Manual page 126

SOFTWARE INTERFACE
CAUTION:
3–52
1. In the menu taskbar, click on Offline and select the New Settings File item. The
following Create New Setting s File dialog box appears, which allows for the setpoint
file conversion.
2. Select the Firmware Version and Order Code option for the new setpoint file.
3. For future reference, enter some useful information in the Description box to facilitate
the identification of the device and purpose for the file.
4. To select the file name and path for the new file, click the button beside the File Name
box.
5. To select the SR settings file used for initialization, click the Initialize Settings from SR
Settings File button.
6. To locate and select the file to convert, click the button beside the Initialize Settings
from SR Settings File box.
EnerVista 8 Series Setup version 1.4x and above supports conversion of 5.0, 5.1 and 5.2
files. If the file version is less than 5.0 it must be converted to 5.2 using the latest 745
EnerVista Setup before doing the 845 conversion.
7. Click OK to begin the conversion and complete the process. Once this step is
completed, the new file, with a complete path, is added to the EnerVista 8 Series
Setup software environment.
845 TRANSFORMER PROTECTION SYSTEM – INSTRUCTION MANUAL
CHAPTER 3: INTERFACES