CyberData 011146 Operation Manual page 44

Web Page Item
Note
Note
1. Enter the IP address of the SIP Server.
2. Enter the port numbers used for SIP signaling:
3. Enter the SIP registration parameters:
4. For SIP Registration, designate whether you want the VoIP Paging Server to register with your
5. At Unregister on Reboot:
6. In the Register Expiration field, enter the number of seconds the Paging Server registration
Note
CyberData Corporation
Table 2-12. SIP Configuration Parameters (continued)
Description
Click the Save button to save your configuration settings.
Note: You need to reboot for changes to take effect.
Click on the Reboot button to reboot the system.
Click on the Toggle Help button to see a short description of some of the
web page items. First click on the Toggle Help button, and you will see a
question mark (
mouse pointer to hover over a question mark to see a short description of
a specific web page item.
You must click on the Save button and then the Reboot button for the changes to take
effect.
For specific server configurations, go to the following website address:
http://www.cyberdata.net/support/server/index.html
a. Remote SIP Port
b. Local SIP Port
a. SIP User ID
b. Authenticate ID
c. Authenticate Password
SIP server.
a. Select Yes to automatically unregister the Paging Server when you reboot it.
b. Select No to keep the Paging Server registered when you reboot it.
lease remains valid with the SIP Server. The Paging Server automatically re-registers with the
SIP server before the lease expiration timeout.
You must click on the Save button and then the Reboot button for the changes to take
effect.
) appear next to some of the web page items. Move the
931073B
Setting Up the Paging Server
Configure the SIP Parameters
Operations Guide
36