CyberData 011146 Operation Manual page 39

Web Page Item
On this page:
1. Specify whether you use Static or DHCP IP Addressing by marking the appropriate radio
2. For Static IP Addressing, also enter values for the following parameters:
•
•
•
Note
CyberData Corporation
Table 2-11. Network Configuration Parameters (continued)
button. If you select Static IP Addressing, go to
The Paging Server's IP Address: The Paging Server is delivered with a factory default IP
address. Change the default address to the correct IP address for your system.
The Subnet Mask.
The Default Gateway.
You must click on the Save button and then the Reboot button for the changes to take
effect.
Description
Click the Save button to save your configuration settings.
Note: You need to reboot for changes to take effect.
Click on the Reboot button to reboot the system.
Click on the Toggle Help button to see a short description of some of
the web page items. First click on the Toggle Help button, and you
will see a question mark (
items. Move the mouse pointer to hover over a question mark to see
a short description of a specific web page item.
Step
931073B
Setting Up the Paging Server
Configure the Network Parameters
) appear next to some of the web page
2.
Operations Guide
31