ABB FEX300 Operating Instruction page 88

Parameterization
italics = Parameter can only be changed at the "advanced" password level.
88
Diagnosis Values
Fingerprints
FEX300, FEX500
Grounding Check
TFE Detector
SIL detector
SNR Value
Slope Value
Slope Variation
Reference
Signal Ratio
Signal max
Signal min
NV Resets/sec
Amplification Int.
Factory F.P.
Startup F.P.
On demand F.P.
Grounding Check
Power Spectrum
Amplitude 1 Value
Amplitude 2 Value
Amplitude 3 Value
Amplitude 4 Value
TFE Detector
Adjust TFE Full
TFE Threshold
TFE Value
Sensor Coil R.
Elec. Coat. QE1
Elec. Coat, QE2
Elec. Imp. E1-GND
Elec. Imp. E2-GND
Tx check CMR
Tx check 5 m/s
Tx check 10 m/s
Startup F.P.
Sensor Coil R
Elec. Coat. QE1
Elec. Coat. QE2
Elec. Imp. E1-GND
Elec. Imp. E2-GND
Start Tx Startup F.P
Tx check CMR
Tx check 5 m/s
Tx check 10 m/s
Start On demand F.P.
Sensor Coil R
Elec. Coat. QE1
Elec. Coat. QE2
Elec. Imp. E1-GND
Elec. Imp. E2-GND
Start Tx Startup F.P
Tx check CMR
Tx check 5 m/s
Tx check 10 m/s
OI/FEX300/FEX500-EN