ABB FEX300 Operating Instruction page 66

Commissioning
Language
Next
Q (Flowrate) Unit
Next
Qmax
Next
Totalizer/Pulse Unit
Next
Operation
Next
66
Easy Setup
Deutsch
Edit
Easy Setup
l/s
Edit
Easy Setup
25.000 l/s
Edit
Easy Setup
m³
Edit
Easy Setup
Pulse Mode
Edit
FEX300, FEX500
10. U se to call up the edit mode.
11. U se or to select the required language.
to confirm your selection.
12. U se
13. U se to call up the edit mode.
14. U se or to select the required unit.
15. U se to confirm your selection.
16. U se to call up the edit mode.
17. U se or to set the required flow range end
value.
18. U se to confirm your setting.
19. U se to call up the edit mode.
20. U se or to select the required unit.
21. U se to confirm your selection.
22. U se to call up the edit mode.
23. U se or to select the required operating mode.
• „Pulse Mode" In pulse mode, pulses per unit are output.
The relevant settings are provided in the next menu.
• „Fullscale Frequency": In the frequency mode, a
frequency proportional to the flowrate is output. The
maximum frequency can be configured according to the
flow measurement range.
The factory default for the operating mode is "Pulse Mode".
24. U se to confirm your selection.
OI/FEX300/FEX500-EN