ABB FEX300 Operating Instruction page 81

7.2.5.3 Alphanumeric entry
When an alphanumeric entry is made, a value is set by entering the individual decimal
positions.
Next
Next
7.2.5.4 Exiting the setup
For some menu items, values must be entered. If you don't want to change the parameter, you
can exit the menu as described below.
1 By pressing
reaches the end position, "Cancel" is displayed in the lower right.
2 With
start.
Important (Notice)
The LCD display automatically returns to the process display three minutes after the last
button has been actuated.
OI/FEX300/FEX500-EN
-----Menu name----
Parameter name
Value currently set
-----Parameter name----
ABC..........................
ABCDEFGHIJKLMNOPQ
(Next) repeatedly you can move the cursor to the right. Once the cursor
you can terminate editing and exit the menu item. With
1. Select the parameters you want to set in the menu.
2. Use to call up the parameter value for editing. The
position that is currently selected is highlighted.
Edit
3. Use to select the position to be changed.
4. Use or
5. Use to select the next position.
OK
6. If necessary, select and set other decimal positions
using the same procedure as described in steps 3 and 4.
7. Use to confirm your setting.
This concludes the procedure for changing a parameter
value.
FEX300, FEX500
Parameterization
to select the required character.
you can return to the
81