Handy Instructions - Functions 60 To 69 - Mitsubishi FX1S Series Programming Manual

FX Series Programmable Controlers
5.7

Handy Instructions - Functions 60 to 69

Contents:
IST -
SER -
ABSD -
INCD -
TTMR -
STMR -
ALT -
RAMP -
ROTC -
SORT -
Symbols list:
D - Destination device.
S - Source device.
m, n- Number of active devices, bits or an operational constant.
Additional numeric suffixes will be attached if there are more than one operand with the same
function e.g. D
MSB - Most Significant Bit, sometimes used to indicate the mathematical sign of a number, i.e.
positive = 0, and negative = 1.
LSB - Least Significant Bit.
Instruction modifications:
PPP - An instruction operating in 16 bit mode, where PPP identifies the instruction
mnemonic.
PPPP -
A 16 bit mode instruction modified to use pulse (single) operation.
DPPP - An instruction modified to operate in 32 bit operation.
DPPPP - A 32 bit mode instruction modified to use pulse (single) operation.
(
- A repetitive instruction which will change the destination value on every scan unless
modified by the pulse function.
)
- An operand which cannot be indexed, i.e. The addition of V or Z is either invalid or will
have no effect to the value of the operand.
Initial State
Search
Absolute Drum
Incremental Drum
Teaching Timer
Special Timer - Definable
Alternate State
Ramp - Variable Value
Rotary Table Control
Sort Data
, S or for lists/tabled devices D
1 3
FNC 60
FNC 61
FNC 62
FNC 63
FNC 64
FNC 65
FNC 66
FNC 67
FNC 68
FNC 69
S etc.
3+0, +9
Applied Instructions 5
Page
5-67
5-69
5-70
5-71
5-72
5-72
5-73
5-73
5-75
5-77
5-84