Mov (Fnc 12) - Mitsubishi FX1S Series Programming Manual

FX Series Programmable Controlers
5.2.3

MOV (FNC 12)

Mnemonic
MOV
FNC 12
(Move)
16 BIT OPERATION
Note: This instruction has a special programming technique which allows it to mimic the
operation of newer applied instructions when used with older programming tools. See page
1-5 for more details.
Function
Moves data from K, H,
one storage area KnX, KnY, KnM, KnS,
to a new storage T, C, D, V, Z
area
32 BIT OPERATION
FX
Operands
S
KnY, KnM, KnS,
T, C, D, V, Z
PULSE-P Flags
Operation:
The contents of the source device (S) is copied to
the destination (D) device when the control input is
active. If the MOV instruction is not driven, no
operation takes place.
Applied Instructions 5
FX FX
1S 1N 2N
Program steps
D
MOV, MOVP:
5 steps
DMOV,
DMOVP:
9 steps
Zero M8020
5-20
FX
2NC