Error Code Tables - Mitsubishi FX1S Series Programming Manual

FX Series Programmable Controller
6.18

Error Code Tables

Error Detection
Device
D8061
PLC Hardware
error
Error Detection
Device
D8062
PC/HPP
communication
error
(Not FX , FX )
1S 1N
Error Detection
Device
D8063
Serial
communication
errors
Stored Error
Number
0000 No error
6101 RAM error
6102 Operation circuit error
6103 I/O bus error (M8069 = ON)
6104 Extension unit 24V failure (M8069=ON)
6105 Watch Dog Timer error
Stored Error
Number
0000 No error
6201 Parity/ overrun/ framing error
6202 Communications character error
6203 Communication data sum check error
6204 Data format error
6205 Command error
Stored Error
Number
0000 No error
6301 Parity/ overrun/ framing error
6302 Comms character error
6303 Comms data sum check error
6304 Comms data format error
Command error
Computer link - received command
6305
other than GW (global) when station
number was FF
6306 Watchdog timer error
6312 Parallel link character error
6313 Parallel link data sum check error
6314 Parallel link data format error
Associated Meaning
Associated Meaning
Associated Meaning
Diagnostic Devices 6
FX FX FX
1S 1N 2N
Action
Check the cable
connection between the
extension unit/block and
the PLC
Scan time has exceeded
the WDT time value set
in D8000. Check user
program.
Action
Check the cable
connection between the
programming device and
the PLC
Note
Check communication
settings, parameters and
applicable devices.
(Computer link, N:N
network, Parallel link
etc.)
Refer to FX
Communication Users
Manual for wiring
techniques
6-23
FX
2NC