Mitsubishi FX1S Series Programming Manual page 334

FX Series Programmable Controlers
5.16.1.1.16 Example program 5
Example using the STL instruction
S20
a) Specifies station No. 2
b) Instruction code for operation command
c) Forward rotation command
d) Transmits/receives a command to/from the inverter.
e) Changes to the 'error processing' state as an error has occurred.
f) Changes to the 'next' state as receive is normally finished.
g) Receive is abnormally finished.
h) Receive is complete.
5.16.1.1.17 Related Error Code Lists
PLC hardware error code list (M8061, D8061)
K6110
Grammar error code list (M8065, D8065)
K6512
Operation error code list (M8067, D8067)
K6760
K6761
M8000
EXTR
g)
M8156
h)
M8029
There is an abnormality in the extension ROM cassette.
The FNC 180 is described while the extension ROM cassette is not mounted.
The sum of the value read by the ABS instruction does not match.
When FNC185 was executed, the extension memory cassette was not
mounted.
Or, the firmware of the function No. specified by the first parameter does not
exist in the extension memory cassette.
MOV K2
MOV HFA
MOV H02
K12 D100 D101
SET
SET
Applied Instructions 5
a)
D100
b)
D101
c)
D102
d)
D102
e)
S900
f)
S21
5-214