Asc (Fnc 76) - Mitsubishi FX1S Series Programming Manual

Hide thumbs Also See for FX1S Series:

Table of Contents

FX Series Programmable Controlers

ASC (FNC 76)

16 BIT OPERATION

The source data is converted to its associated ASCII codes. The codes are then stored in the

destination devices D, see example shown below.

Note: ASCII Char cannot be entered from a hand held programmer.

Alphanumeric data e.g.

alphanumeric

0-9, A - Z and a - z etc.

string can be

Note: Only one, 8

converted to its

character string may be

entered at any one

32 BIT OPERATION

uses 4 consecutive

The source data string S consists of up to 8

ch a r a c te r s ta k e n fr o m t h e p ri n ta b le A S C I I

character (Char) set. If less than 8 Char are used,

the difference is made up with null Char (ASCII

Applied Instructions 5

Program steps

Table of Contents

Fx1n series Fx2nc series Fx2n series