Lone Worker; Dmr All Call Dial String; Sdp660 – User Manual Tnm-U-E - Simoco SDP660 User Manual

SDP660 – USER MANUAL TNM-U-E-0114
8.13 L W
ONE ORKER
Lone Worker is used to initiate emergency alarm mode when the user is unresponsive after a
predetermined time. A data message is also sent to the device management software (via the
gateway) indicating that the worker may be incapacitated.
The Lone Worker countdown is reset after any user activity with the radio- either PTT or "Lone
Worker" button are pressed
8.14 DMR A C D S
LL ALL IAL TRING
This function is used as a short sequence of key presses for "All Call" dial string (******#). In order
to initiate All Call, the user should press PTT within 5 seconds after "DMR All Call" button is
pressed.
Jul 13 (Iss 1.1) Page 54 SPECIAL FUNCTIONS