Available Dsp Modes According To The Speaker Arrangement - JVC RX-6010VBK Service Manual

Available DSP Modes According to the Speaker Arrangement

Available DSP modes will vary depending on how many speakers are used with this receiver.
Make sure that you have set the speaker information correctly (see page 12).
Speaker arrangements
TV
Front
speaker
Center speaker
Rear
speaker
TV
Front
speaker
Rear
speaker
TV
Front
speaker
Center speaker
Each time you press DSP MODE on the front panel or SURROUND MODE on
Front
the remote control, the DSP modes change as follows:
speaker
By pressing DSP MODE:
• THEATER
• LIVE CLUB
• DANCE CLUB
• HALL
Rear
• PAVILION
speaker
• DSP OFF (DSP mode is canceled)
To activate the Surround
Front
mode, press SURROUND ON/
speaker
OFF on the front panel.
Rear
speaker
Each time you press DSP MODE on the front panel or SURROUND MODE on Each time you press DSP MODE on the front panel or SURROUND MODE on
the remote control, the DSP modes change as follows: the remote control, the DSP modes change as follows:
Front
speaker
By pressing DSP MODE:
• THEATER
• DSP OFF (DSP mode is canceled)
To activate the Surround
mode, press SURROUND ON/
OFF on the front panel.
Available DSP modes
By pressing SURROUND MODE:
• SURROUND ON
(DOLBY PRO LOGIC, DOLBY
DIGITAL, or DTS SURROUND)
• THEATER
• LIVE CLUB
• DANCE CLUB
• HALL
• PAVILION
• DSP OFF (DSP mode is canceled)
To activate the Surround
mode, you can also press
SURROUND on the remote
control.
By pressing SURROUND MODE:
• SURROUND ON
(DOLBY PRO LOGIC, DOLBY
DIGITAL, or DTS SURROUND)
• DSP OFF (DSP mode is canceled)
To activate the Surround
mode, you can also press
SURROUND on the remote
control.
20