Oscillating Axle Lockout Test (If Equipped) - JLG 800A Operation And Safety Manual

SECTION 4 - MACHINE OPERATION
NOTE: Crane and lifting devices, chains, slings, etc., must be capable of
handling the gross machine weight.
ABOVE IS MINIMUM WEIGHT. CHECK WEIGHT OF UNIT PRIOR TO LIFTING.
NOTE: Lifting eyes are provided at the front and rear in the frame slab.
Each of the four chains or slings used for lifting machine must be
adjusted individually so machine remains level when elevated.
SECURE TURNTABLE WITH TURNTABLE LOCK BEFORE TRAVELING LONG DISTANCES
OR HAULING MACHINE ON TRUCK/TRAILER.
4-16

4.11 OSCILLATING AXLE LOCKOUT TEST (IF EQUIPPED)

LOCKOUT SYSTEM TEST MUST BE PERFORMED QUARTERLY, ANY TIME A SYSTEM COM-
PONENT IS REPLACED, OR WHEN IMPROPER SYSTEM OPERATION IS SUSPECTED.
Refer to Section 2.4, Oscillating Axle Lockout Test (If Equipped) for
procedure.
4.12 TOWING
The machine is not equipped with a tow package. Refer to Sec-
tion 5 for emergency towing procedures.
– JLG Lift – 3121209