Gauge Technical Specifications (Bt); Probe Technical Specifications (Bt) - Elcometer 224 Operating Instructions Manual

16 GAUGE TECHNICAL SPECIFICATIONS (BT)

Display Information
Battery Type
Battery Life
Gauge Dimensions
(h x w x d)
Gauge Weight
(with supplied batteries)
Probe Tip
Operating Temperature -10 to 50°C (14 to 122°F)
Storage Temperature -10 to 60°C (14 to 140°F)

17 PROBE TECHNICAL SPECIFICATIONS (BT)

All Elcometer surface profile probes are fitted with a tough tungsten
carbide user replaceable tip as standard, suitable for up to 20,000
readings.
Supplied with either a standard cable or armoured metal reinforced heavy
duty cable, all probes are supplied with an Elcometer test certificate, glass
zero tile and calibration test foils; nominal values 125µm (5mil) & 500µm
(20mils).
Range
Resolution
Accuracy
Probe Design
Separate Flat Surface Profile Probe: Standard
Separate Flat Surface Profile Probe: Armoured
Separate Convex Surface Profile Probe: Standard
Separate Convex Surface Profile Probe: Armoured 175mm (6.89")
Gauge with Integral Probe
†
Patent Applied For
www.elcometer.com
60mm (2.4") QVGA colour TFT display, 320 x 240 pixels
2 x AA dry cell batteries, rechargeable batteries can also be used
~24 hours of continuous use at 1 reading per second
Using default settings & lithium batteries supplied, alkaline or rechargeable
batteries may differ
Integral: 16.8 x 7.30 x 3.70cm (5.61 x 2.87 x 1.46")
Separate: 14.1 x 7.30 x 3.70cm (5.55 x 2.87 x 1.46")
Integral: 218g (7.69oz)
Separate: 161g (5.68oz)
Tungsten carbide tip 60° angle 50µm (2mil) tip radius
0 - 500µm (0 - 20mils)
1µm (0.1mil)
±5% or ±5µm (±5% or ±0.2mil)
Minimum
Headroom
125mm (4.92")
165mm (6.50")
†
135mm (5.31")
†
185mm (7.28")
‡
Minimum Pipe Diameter
R
Minimum Sample
Diameter
25mm (1")
25mm (1")
‡
75mm (3")
‡
75mm (3")
25mm (1")
58