Elcometer 224 Operating Instructions Manual page 14

Model t surface profile gauge

Hide thumbs Also See for 224:

Table of Contents

Bluetooth (T) and USB Data output (BT)

Elcometer 224 gauges have the ability to transfer data via USB to a

computer or wirelessly via Bluetooth technology to PC's, PDA's or

mobile phones which are Bluetooth enabled using ElcoMaster™ 2.0

or ElcoMaster™ for Android™.

B l u e t o o t h

Menu/Bluetooth/Enable Bluetooth.

regarding ElcoMaster™ 2.0 see page 27 Downloading Data.

ElcoMaster™ 2.0 Data output (BT)

Users can download data from any Elcometer gauge directly into

ElcoMaster™ 2.0 by connecting the gauge to the PC and following the

on screen prompts.

Once the data has been transferred to the computer, the user can

produce professional reports in seconds. Data can also be

transferred into programs, such as Excel , in a similar manner.

For more information regarding ElcoMaster™ 2.0 see page 27

Downloading Data.

Calibration Lock (T)

To avoid accidental amendments to the calibration settings switching

on the Cal/Calibration Lock feature' locks' the user from undertaking

any changes to the calibration without first un-checking the

Cal/Calibration Lock feature.

When the Calibration Lock is enabled, users can still test the

calibration via Cal/Test Calibration but will be unable to validate or

re-calibrate the gauge.

Counted Average (BT)

Users can pre-define the number of readings using the counted average

function. When in batching (T), select Batch/New Batch/Batch

Type/Counted Average and set the number of readings as required.

The average of this pre-defined number will be saved into the batch, but

the individual readings within the counted average are not saved. When

not in batching (B & T), select Display/Statistics/Counted Average

and set the number of readings as required.

d a t a o u t p u t c a n b e s w i t c h e d o n v i a

For more information

www.elcometer.com

Table of Contents