Advertisement
Advertisement
Table of Contents
Related Manuals for Elcometer 2290
Summary of Contents for Elcometer 2290
- Page 1 Elcometer 2290 Daniel Flow Gauge Operating Instructions...
- Page 2 Elcometer Instruments Ltd. All other trademarks acknowledged. © Copyright Elcometer Instruments Ltd. 2006. All rights reserved. No part of this Document may be reproduced, transmitted, transcribed, stored (in a retrieval system or otherwise) or translated into any language, in any form or by any means (electronic, mechanical, magnetic, optical, manual or otherwise) without the prior written permission of Elcometer Instruments Ltd.
- Page 3 CONTENTS Section Page About this instrument ............2 Measuring the fluidity of a liquid .
- Page 4 Our products cover all aspects of coating inspection, from development through application to post application inspection. This Elcometer 2290 Daniel Flow Gauge is a world beating product. With the purchase of this product you now have access to the worldwide service and support network of Elcometer. For more information visit our website at www.elcometer.com...
- Page 5 To maximise the benefits of your new Elcometer 2290 Daniel Flow Gauge please take some time to read these Operating Instructions. Do not hesitate to contact Elcometer or your Elcometer supplier if you have any questions. 2 MEASURING THE FLUIDITY OF A LIQUID 2.1 BEFORE YOU START...
- Page 6 3. Rotate the instrument through 90° until the reservoir is vertical and immediately start a stop watch. The product runs out of the reservoir and flows out over the graduated plate. 4. At the end of the time specified, record the distance the product has flowed over the graduated plate.
- Page 7 0.5 units 4 RELATED EQUIPMENT In addition to the Elcometer 2290 Daniel Flow Gauge, Elcometer produces a wide range of other coating testing equipment. Users of the Elcometer 2290 Daniel Flow Gauge may also benefit from the following Elcometer products: •...
Need help?
Do you have a question about the 2290 and is the answer not in the manual?
Questions and answers