Elcometer 224 Operating Instructions Manual page 22

Opening an existing batch
By selecting Batch/Open Existing Batch, the user will find a list of all
the batches that have already been created, together with the number
of readings stored in each batch.
To open a particular batch use the up and down arrow softkeys and
select the appropriate batch.
The Elcometer 224 will return the gauge to the main reading screen
and the selected batch name will be shown at the top of the display
(together with a unique gauge batch id number - allowing no two
batches to have exactly the same name).
Copying an existing batch
By selecting Batch/Copy Batch the user will find a list of all the
batches that have already been created, together with the number of
readings stored in each batch.
To copy a particular batch use the up and down arrow softkeys and
select the appropriate batch.
The Elcometer 224 will then copy all the batch settings - batch type,
warning limits, and the batch name - and then ask the user whether
they wish to rename the batch.
Pressing the Yes softkey the user will then be asked to rename the
batch using the renaming procedure described on pages 19 - 20.
Pressing the No softkey (or pressing the Esc softkey whilst in the
renaming procedure) will make the Elcometer 224 copy the existing
batch name to the new batch - thereby two batches will have the same
batch name.
Copying a batch does not copy the individual readings within that
batch.
Clearing an existing batch
By Selecting Batch/Edit Batch/Clear Batch, the user will find a list of
all the batches that have already been created, together with the
number of readings stored in each batch.
To clear a particular batch's individual readings only, use the up and
down arrow softkeys and select the appropriate batch.
21
R
www.elcometer.com