Elcometer 224 Operating Instructions Manual page 2

Pb Hg
The Elcometer 224 Model T meets the Radio and Telecommunications Terminal
Equipment Directive. The Model B meets the Electromagnetic Compatibility
Directive. This product is Class B, Group 1 ISM equipment according to CISPR 11.
Class B product: Suitable for use in domestic establishments and in establishments
directly connected to a low voltage power supply network which supplies buildings
used for domestic purposes. Group 1 ISM product: A product in which there is
intentionally generated and/or used conductively coupled radio-frequency energy
which is necessary for the internal functioning of the equipment itself.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Elcometer 224 Model T: The Giteki mark, its ordinance number and the FCC ID can be accessed via:
Menu/About/Legal/Regulatory
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Modifications not expressly approved by Elcometer Limited could void the user's authority to operate the
equipment under FCC rules.
This Class B digital apparatus complies with Canadian ICES-003
is a registered trademark of Elcometer Limited, Edge Lane, Manchester, M43 6BU. United Kingdom
R
are trademarks owned by Bluetooth SIG Inc and licensed to Elcometer Limited.
Bluetooth SIG QDID = B014393
All other trademarks acknowledged.
Gauge dimensions: Integral: 168 x 73 x 37mm (6.61 x 2.87 x 1.46");
Separate: 141 x 73 x 37mm (5.55 x 2.87 x 1.46")
Gauge Weight: Integral: 218g (7.69oz) including batteries;
Separate: 161g (5.68oz) including batteries.
© Elcometer Limited 2012 - 2013. All rights reserved. No part of this document may be reproduced,
transmitted, transcribed, stored (in a retrieval system or otherwise) or translated into any language, in any
form or by any means (electronic, mechanical, magnetic, optical, manual or otherwise) without the prior
written permission of Elcometer Limited.
TMA-0524 Issue 04
R
www.elcometer.com