Elcometer 224 Operating Instructions Manual page 4

WELCOME
Thank you for your purchase of this Elcometer 224 Surface Profile
Gauge. Welcome to Elcometer.
Elcometer are world leaders in the design, manufacture and supply of
coatings inspection equipment. Our products cover all aspects of
coating inspection, from development through application to post
application inspection.
The Elcometer 224 Surface Profile Gauge is a world beating product.
With the purchase of this gauge you now have access to the
worldwide service and support network of Elcometer.
For more information visit www.elcometer.com
ABOUT YOUR GAUGE
The Elcometer 224 Surface Profile Gauge is a handheld gauge for fast
and accurate measurement of surface profile.
The gauge is available in two models; Model B and T.
This manual describes the operation of both Elcometer 224 models
and indicates, where necessary, which specific model(s) the feature is
available on in brackets after the feature.
All versions of the gauge feature an easy-to-use menu driven
graphical interface which guides the user through tasks such as
gauge configuration and calibration adjustment.
The gauge is available either with a built-in integral probe or as a
separate probe version. A range of probes is available to suit
requirements.
CONVENTIONS IN THESE INSTRUCTIONS
The Elcometer 224 is operated using a simple menu structure which
helps you get the most from your gauge.
As an example, the Languages option is located within Setup which is
under the Menu softkey and is shown in these instructions as:
3
R
Menu/Setup/Language
www.elcometer.com