Elcometer 224 Operating Instructions Manual page 24

Batch Readings Graph
By selecting Batch/Review Batch/Batch Graph the user can review
all readings in the selected batch as a graph.
Up to five horizontal axes can be displayed representing different
values / statistics as follows:
Highest reading in the batch " "
Lowest reading in the batch "
Mean of readings in the batch "
High limit for the batch "
Low limit for the batch "
The readings are displayed as white or red vertical
bars; white if a reading is within limits (or no limits
have been set), and red if outside set limits.
If there are more readings in the batch than can be
displayed on a single screen, multiple readings
will be combined into one bar. Should a single
reading within the 'combined bar' be outside the
enabled limits, the whole bar will be red.
Pessing the Zoom+ softkey, allows each
individual reading to be displayed, thereby
showing the individual readings outside the
limits.
When zoomed in, the graph will always display
the first 25 readings. Pressing the
will display the last 25 readings taken.
Subsequent presses of the
scroll backwards, pressing the
scroll forwards through the readings, 25
readings at a time.
Pressing the Zoom- softkey returns to the
original overview graph of all readings in the
batch.
To return the gauge to the Batch Review menu,
press the Back softkey.
23
R
"
(when enabled)
"
(when enabled)
"
(for batches of more than one reading)
"
(for batches of more than one reading)
softkey
softkey will
softkey will
www.elcometer.com