Elcometer 224 Operating Instructions Manual page 27

Appending the batch name in this way allows the user to quickly identify -
or link - similar batches together.
Once a fixed batch size batch has been filled, no additional readings can
be added to that batch; a partially completed fixed batch size batch,
however, can be re-opened and completed at a later date.
To continue a batch link, press Batch/Open Existing Batch and select
the last batch in the link. If the batch is full, the gauge will prompt the user
to open a new batch before continuing. If the batch is partially complete
the user can complete the batch before continuing to a new batch.
When downloading linked batches into ElcoMaster™ 2.0; the original
batch name will be displayed (Component A in the above example).
Selecting this batch name will download all linked batches into
ElcoMaster™ 2.0 at the same time. For more information on
downloading batches see page 27.
Note: Once a fixed batch size batch has been created and data has been stored into
the memory, the user cannot rename the batch name within the gauge. The batch
name can be amended using the ElcoMaster™ 2.0 software.
www.elcometer.com
R
26