Settings Menus - Minolta magicolor 2300 Series Service Manual

CONSUMABLE
USAGE
1: When displayed in service mode, the Prev. key can be used to scroll through the
options.
2-2.

Settings menus

(1) Language menu
• The language in which messages are displayed can be changed.
(2) Special pages
Statistic Page
Demo Page
Menu Map
(3) Engine menu
Set the length of time until the printer enters energy saver mode after it no
longer receives print jobs or is not operated.
Energy Saver
If a print job is received while the printer is in energy saver mode, the printer
warms up, then returns to normal print mode before starting to print.
When set to "On", the printer continues printing even if the specified tray is
not loaded with paper of the correct size.
When set to "Off", the printer stops and displays a message indicating that
Auto Continue paper of the correct size should be loaded into the specified tray if the speci-
fied tray does not contain paper of the correct size.
The Auto Continue setting can also be changed while printing. If this is done,
the setting will remain valid for future print jobs.
When set to "On", the printer automatically switches to a different media tray
containing paper of the same size and type and continues printing if the
specified tray runs out of paper.
When set to "Off", the printer stops and displays a message indicating that
Chaining Tray
paper should be loaded into the specified tray if the specified tray runs out of
paper.
The Chaining Tray setting can also be changed while printing. If this is done,
the setting will remain valid for future print jobs.
This is used when replacing the toner cartridge. By selecting the color of the
Change Toner toner cartridge that you wish to replace (remove), the carousel automatically
stops so that the selected toner cartridge can be removed.
BLACK TONER
YELLOW TONER
MAGENTA TONER
CYAN TONER
DRUM UNIT
A configuration page can be printed.
A demonstration page can be printed.
A menu chart page can be printed
114