Minolta magicolor 2300 Series Service Manual page 111

(3) Message status
Message
IDLE
PROCESSING
PRINTING
WARMING UP
CALIBRATING
ENERGY SAVER
TRAYX EMPTY
TRAY2 LOW
SIZE MISMATCH
PUT MEDIA TRAY YYYY
PUT XXXX TRAY1
PUT XXXX YYYY
MEDIA JAM TRAYX
MEDIA JAM EXIT
MEDIA JAM FUSER
MEDIA JAM
TRANSFER ROLLER
MEDIA JAM
DUPLEX LOWER
MEDIA JAM
DUPLEX UPPER
PRINTER COVER OPEN
DRAWER OPEN TRAY2
COVER OPEN TRAY2
WASTE: NEAR FULL
• The printer is ready to accept data, and no jobs are in
progress.
• The printer is processing data.
• The printer is printing.
• The printer is warming up.
• After 200 one-sided pages are continuously printed the
printer automatically pauses to do an Auto-Image Density
Control (AIDC) cycle.
• The printer is in energy saver mode to reduce power con-
sumption during periods of inactivity.
• The media tray "X" (specified tray) is out of media.
• The optional media tray is almost out of media.
• Media type "XXXX" specified with the printer driver is differ-
ent from the type of media loaded into Tray1 (multipurpose
tray).
• The media detected in tray "X" (specified tray) doesn't
match the media size setting.
• Change the media in the tray to "YYYY" (specified size) or
change the media size setting.
• Media type "XXXX" specified with the printer driver is differ-
ent from the type of media loaded into Tray1 (multipurpose
tray).
• During printing, the specified tray "YYYY" has run out of
the specified type of media "XXXX".
• A misfeed occurred while media was fed from tray "X"
(specified tray).
• A misfeed occurred after between the print engine and the
output tray.
• A misfeed occurred after fuser section.
• A misfeed occurred in the transfer roller section.
• A misfeed occurred near the feeder of the duplex unit.
• A misfeed occurred near the media holding area of the
duplex unit.
• The printer's front door and/or right-side door are open and
must be closed.
• The cover of the optional duplex unit is open and must be
closed.
• The media tray is not fully inserted into the optional media
feed unit (Tray2).
• The right-side door of the optional media feed unit (Tray2)
is open.
• The waste toner bottle is nearly full.
111