15-21. Disassembling the fusing unit
4131D050AB
4131D051AA
4131D052AA
4131D053AB
1. Remove the cover. (2 screws)
2. Remove the Fusing roller heater lamps (H1) and
Fusing Pressure roller heater lamp(H2). (6 screws)
Notes for installation
Be sure to install the screws securing the leads in
the correct locations.
3. Remove the release lever, the pre-fusing guide
plate and the post-fusing guide plate. (2 screws)
4. Remove the thermostat (TS1). (2 screws)
95