15-22. Removing the fusing cooling fan motor (M5)
4131D029AA
4131D030AA
4131D031AA
15-23. Replacing the paper take-up roller
4131D058AA,
1. Remove the rear cover.
2. Unplug the connectors (PJ16, PJ17 and PJ29)
from the master board (PWB-A), and then remove
the wiring from the cable holders.
3. Remove the right-side door.
4. Remove the right-side door cover. (2 screws)
5. Remove the right-front cover. (1 screw)
6. Remove the paper output unit. (6 screws)
7. Remove the wiring from the cable holders.
8. Remove the fusing cooling fan motor. (4 screws)
1. Remove the right-side door.
2. Remove the knob, and then
replace the paper take-up roller.
4131D034AA
97